Add/Edit Selective Q-In-Q - ZyXEL Communications XS3800-28 User Manual

28-port 10gbe l3 managed switch

Hide thumbs Also See for XS3800-28:

Table of Contents

Table 227 SWITCHING > VLAN Stacking > Selective QinQ (continued)

60.6.1 Add/Edit Selective Q-in-Q

Click Add/Edit, or select an entry and click Add/Edit in the SWITCHING > VLAN Stacking > Selective QinQ

screen to display this screen.

Figure 352 SWITCHING > VLAN Stacking > Selective QinQ > Add/Edit (Standalone Mode)

Figure 353 SWITCHING > VLAN Stacking > Selective QinQ > Add/Edit (Stacking Mode)

The following table describes the labels in this screen.

Table 228 SWITCHING > VLAN Stacking > Selective QinQ > Add/Edit

Chapter 60 VLAN Stacking

This is the service provider's priority level in the packets.

Select an entry's check box to select a specific entry. Otherwise, select the check box in the table

heading row to select all entries.

Click Add/Edit to add a new entry or edit a selected one.

Click Delete to remove the selected entries.

Enable the switch button to activate this rule.

Enter a descriptive name (up to 32 printable ASCII characters except [ ? ], [ | ], [ ' ], [ " ] or [ , ]) for

identification purposes.

The port number identifies the port you are configuring. In Stacking mode, the first field is the slot ID

and the second field is the port number.

Enter a customer VLAN ID (the inner VLAN tag) from 1 to 4094. This is the VLAN tag carried in the

packets from the subscribers.

XS3800-28 User's Guide