ZyXEL Communications XS3800-28 User Manual page 81

Table 18 Navigation Panel Links (Standard Mode) (continued)
LINK DESCRIPTION
IPv4 Source Click the link to unfold the following sub-link menu.
Guard
IP Source This link takes you to screens where you can configure filtering of unauthorized DHCP and ARP
Guard
packets in your network.
DHCP This link takes you to screens where you can view DHCP snooping database details and configure
Snooping
DHCP snooping settings on ports or VLANs. You can use DHCP snooping to filter unauthorized
DHCP packets on the network and to build the binding table dynamically.
ARP This link takes you to screens where you can view ARP inspection status, and configure ARP
Inspection
inspection settings on ports or VLANs. You can use ARP inspection to filter unauthorized ARP pack-
ets on the network.
IPv6 Source Click the link to unfold the following sub-link menu.
Guard
IPv6 Static The link takes you to screens where you can view IPv6 static binding status and manually create
Binding
IPv6 source guard static binding entries.
IPv6 Source The link takes you to screens where you can define policies to have IPv6 source guard forward
Guard
valid addresses and/or prefixes and allow or block data traffic from all link-local addresses, and
apply the configured IPv6 source guard policy to a port.
IPv6 The link takes you to screens where you can set up DHCPv6 snooping policies for the binding
Snooping
table and enable the policies on VLAN interfaces.
DHCPv6 The link takes you to a screen where you can specify which ports are trusted for DHCPv6 snoop-
Trust Setup
ing.
Port Authenti- Click the link to unfold the following sub-link menu.
cation
These links take you to screens where you can configure IEEE 802.1x port authentication as well as
MAC authentication for clients communicating through the Switch.
802.1x The link takes you to a screen where you can activate IEEE 802.1x security on a port.
MAC The link takes you to a screen where you can activate MAC authentication on a port.
Authentica
tion
Guest The link takes you to a screen where you can activate enable and assign a guest VLAN to a port.
VLAN
Compound The link takes you to a screen where you can allow network access for clients that pass either IEEE
Authentica
802.1x authentication or MAC authentication, or pass both IEEE 802.1x authentication and MAC
tion Mode
authentication.
Port Security This link takes you to a screen where you can activate MAC address learning and set the
maximum number of MAC addresses to learn on a port.
MAINTENANCE
Certificates The link takes you to a screen where you can import the Switch's CA-signed certificates.
Cluster Man- This link takes you to a screen where you can configure clustering management and view its sta-
agement tus.
Configuration Click the link to unfold the following sub-link menu.
Restore This link takes you to a screen where you can upload a stored device configuration file.
Configurati
on
Backup This link takes you to a screen where you can save your Switch's configurations (settings) for later
Configurati
use.
on
Auto This link takes you to a screen where you can overwrite the running configuration stored in the
Configurati
Switch's RAM.
on
Chapter 4 Web Configurator
XS3800-28 User's Guide
81