ZyXEL Communications XS3800-28 User Manual page 614

28-port 10gbe l3 managed switch

Hide thumbs Also See for XS3800-28:

Table of Contents

Note: If DHCP snooping is enabled but there are no trusted ports, DHCP requests cannot

reach the DHCP server.

Note: The Switch will drop all DHCP requests if you enable DHCP snooping and there are no

trusted ports.

You can also specify the maximum number for DHCP packets that each port (trusted or untrusted) can

receive each second.

To open this screen, click SECURITY > IPv4 Source Guard > DHCP Snooping > DHCP Snp. Port Setup.

Figure 482 SECURITY > IPv4 Source Guard > DHCP Snooping > DHCP Snp. Port Setup (Standalone Mode)

Figure 483 SECURITY > IPv4 Source Guard > DHCP Snooping > DHCP Snp. Port Setup (Stacking Mode)

Chapter 83 DHCP Snooping

XS3800-28 User's Guide

Troubleshooting