Add/Edit Ipv4 Ospf Interfaces - ZyXEL Communications XS3800-28 User Manual

The following table describes the labels in this screen.
Table 269 NETWORKING > OSPF > IPv4 OSPF > OSPF Interface
LABEL
Index
Network
Area ID
Network Type
Authentication
Key ID
Cost
Priority
Add/Edit
Delete

67.4.1 Add/Edit IPv4 OSPF Interfaces

Use this screen to add/edit an IPv4 OSPF interface. See
on OSPF.
Click Add/Edit, or select an entry and click Add/Edit in the NETWORKING > OSPF > IPv4 OSPF > OSPF
Interface to display this screen.
Figure 404 NETWORKING > OSPF > IPv4 OSPF > OSPF Interface > Add/Edit
Chapter 67 OSPF
DESCRIPTION
This field displays the index number for an interface.
This field displays the IP interface information.
This field displays the area ID (in an IP address format with dotted decimal notation) of an area
to associate the interface to that area.
This field displays the network type (broadcast/point-to-point) of this OSPF network.
This field displays the authentication method used (Same-as-Area, None, Simple or MD5).
When the Authentication field displays MD5, this field displays the identification number of the
key used.
This field displays the interface cost used for calculating the routing table.
This field displays the priority for this OSPF interface.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entries.
XS3800-28 User's Guide
Section 67.1 on page 501
509
for more information