Bpdu Guard Setup - ZyXEL Communications XS3800-28 User Manual

28-port 10gbe l3 managed switch

Hide thumbs Also See for XS3800-28:

Table of Contents

Figure 465 SECURITY > BPDU Guard > BPDU Guard Status (Stacking Mode)

The following table describes the fields in the above screen.

Table 316 SECURITY > BPDU Guard > BPDU Guard Status

BPDU guard global

79.3 BPDU Guard Setup

Use this screen to turn on the BPDU guard feature on the Switch and ports.

Click SECURITY > BPDU Guard > BPDU Guard Setup to display the configuration screen as shown.

Chapter 79 BPDU Guard

This field displays whether BPDU guard is activated on the Switch.

This field appears only in Stacking mode. Click the drop-down list to choose the slot

number of the Switch in a stack.

This field displays the port number. In Stacking mode, the first number represents the slot ID

and the second is the port number. Please note that the default stacking ports (the last

four ports of your Switch) cannot be configured. They are reserved for stacking only.

This shows whether BPDU guard is activated on the port.

This shows whether the port is shut down (Err-disable) or able to transmit packets

(Forwarding).

XS3800-28 User's Guide