Lldp-Med Location - ZyXEL Communications XS1930-12HP User Manual

Table 128 Advanced Application > LLDP > LLDP-MED Network Policy
LABEL
DSCP
Priority
Add
Cancel
Index
Port
Application Type
Tag
VLAN
Priority
DSCP
Delete
Cancel

31.9 LLDP-MED Location

Click Advanced Application > LLDP > LLDP-MED Location (Click Here) to display the screen as shown
next.
Chapter 31 Link Layer Discovery Protocol (LLDP)
DESCRIPTION
Enter the DSCP value of the network policy. The value is defined from 0 through 63 with the 0
representing use of the default DSCP value.
Enter the priority value for the network policy.
Click Add after finish entering the network policy information. A summary table will list all the
Switch you've added.
Click Cancel to begin entering the information afresh.
This field displays the of index number of the network policy. Click an index number to edit
the rule.
This field displays the port number of the network policy.
This field displays the application type of the network policy.
This field displays the Tag Status of the network policy.
This field displays the VLANID of the network policy.
This field displays the priority value of the network policy.
This field displays the DSCP value of the network policy.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Check the rules that you want to remove, then click the Delete button.
Click Cancel to clear the selected check boxes.
XS1930 Series User's Guide
254