Product Description; Features - Agilent Technologies Infinity II SFC Binary 1260 User Manual

1
Introduction
Instrument and Operation

Product Description

The 1260 Infinity II SFC Binary pump is equipped with passive inlet valves
and with special seals and valves to allow for CO
channel B adds organic modifier for either isocratic or gradient performance.
Pump head B is also equipped with a purge valve to allow for quick changeover
of the organic modifier. In addition, it has an integrated solvent selection
2-channel degasser and built-in active seal-wash on channel A for increased
uptime
Figure 2

Features

• Fast and precise gradients - the pump is the perfect choice for fast and
• Power range combining high pressure up to 600 bar and flow rates up to
• Integrated 2-channel degasser change-over of solvents for purging and
• Built-in active seal-wash for increased uptime.
• Integrated Solvent Selection Valve.
12
Status indicator
Purge valve
Degasser
Pump head A
Pump head B
Leak drain
Power switch
Overview of the pump.
precise gradients using UV-only, as well as SFC/MS systems.
5 mL/min for maximum SFC performance.
priming the pump.
pumping in channel A while
2
1260 SFC Binary Pump