Agilent Technologies Infinity II SFC Binary 1260 User Manual page 29

Table 2
Type
Instrument Control
Local control
Communications
Safety and
maintenance
GLP features
Housing
1260 SFC Binary Pump
Performance Specifications 1260 Infinity II SFC Binary Pump (G4782A)
Specification
Lab Advisor B.02.09 or above
LC and CE Drivers A.02.16 or above
Agilent Instant Pilot (G4208A)
Controller-area network (CAN), Extended
Remote Interface (ERI), Local Area
Network (LAN)
Extensive diagnostics, error detection
and display through Agilent LabAdvisor,
leak detection, safe leak handling, leak
output signal for shutdown of the
pumping system. Low voltage in major
maintenance areas.
Early maintenance feedback (EMF) for
continuous tracking of instrument usage
in terms of seal wear and volume of
pumped mobile phase with pre-defined
and user settable limits and feedback
messages. Electronic records of
maintenance and errors.
All materials are recyclable
Site Requirements and Specifications
Performance Specifications
Comments
For details about supported
software versions refer to the
compatibility matrix of your
version of the LC and CE
Drivers
B.02.19 or above
2
29