Agilent Technologies Infinity II SFC Binary 1260 User Manual page 185

Figure 28 Telnet - Current settings in "Using Stored" mode
6 Change the IP address (in this example 192.168.254.12) and type "/" to list
Figure 29 Telnet - Change IP settings
1260 SFC Binary Pump
current settings.
Manual Configuration
information about the LAN interface
MAC address, initialization mode
Initialization mode is Using Stored
active TCP/IP settings
TCP/IP status - here ready
connected to PC with controller software (e.g. Agilent
ChemStation), here not connected
change of IP setting to
Initialization mode is Using Stored
active TCP/IP settings
stored TCP/IP settings in non-volatile memory
connected to PC with controller software (e.g. Agilent
ChemStation), here not connected
12
LAN Configuration
185