Agilent Technologies Infinity II SFC Binary 1260 User Manual page 183

2 Type the following at the system (DOS) prompt:
1260 SFC Binary Pump
• c:\>telnet <IP address> or
•
c:\>telnet <host name>
Figure 25 Telnet - Starting a session
where <IP address> may be the assigned address from a Bootp cycle, a
configuration session with the Handheld Controller, or the default IP
address (see "Configuration Switches"
When the connection was established successfully, the module responds
with the following:
Figure 26 A connection to the module is made
LAN Configuration
Manual Configuration
on page 176).
12
183