Agilent Technologies Infinity II SFC Binary 1260 User Manual page 112

8
Maintenance
Maintenance of a Pump Head with Seal Wash
9
Using the steel side of the insert tool, remove the seal
wash gasket and the wash seal from the support ring.
11
Place a seal wash gasket in the recess of the support
ring. Use a matching orientation of gasket and support
ring. Put the seal holder on top of the gasket.
13
Place the pump housing onto the piston housing.
112
10
Using the plastic side of the insert tool, press the new
wash seal (spring pointing upwards) into the recess of
the support ring.
12
Place the support rings on the piston housing. Note the
correct position of the pins on the support ring.
14
Insert the pistons and carefully press them into the
seals.
1260 SFC Binary Pump