Agilent Technologies Infinity II SFC Binary 1260 User Manual page 155

11
Hardware Information
Firmware Description
(*)
• Agilent Lab Advisor software with files on the hard disk
(*)
• Firmware Update Tool with local files on the hard disk
• Instant Pilot (G4208A) with files on a USB Flash Disk
(*)
Required tools, firmware and documentation are available from the Agilent
web: http://www.agilent.com/en-us/firmwareDownload?whid=69761
The file naming conventions are:
PPPP_RVVV_XXX.dlb, where
PPPP is the product number, for example, 1315B for the G1315B DAD,
R the firmware revision, for example, A for G1315B or B for the G1315C DAD,
VVV is the revision number, for example 650 is revision 6.50,
XXX is the build number of the firmware.
For instructions on firmware updates refer to section Replacing Firmware in
chapter "Maintenance" or use the documentation provided with the
Firmware Update Tools.
Update of main system can be done in the resident system only. Update of the resident
N O T E
system can be done in the main system only.
Main and resident firmware must be from the same set.
Figure 13 Firmware Update Mechanism
1260 SFC Binary Pump 155