Table 5
Bottle Filling Parameters
Parameter
Limits
• Prevent
default: unchecked
analysis.......
• Turn pump
default: unchecked
off...
1260 SFC Binary Pump
Setting up the Pump with the Instrument Control Interface
Description
If this option is checked, the pump won't start a new run if the solvent level in
one or more bottles is below the minimum volume. Enter a minimum volume in
liter, which considers the position of the solvent inlet and size/shape of the
solvent bottle such that no air is drawn if the actual volume gets close to this
limit.
If this option is checked, the pump will turn off before air is aspirated. However,
the residual solvent volume has been calculated for 1 L solvent bottles and may
be too small for large bottles or other vessels.
3
Using the Pump
45