Locating The Chassis Serial Number Id Label On A Qfx10002 Switch; Locating The Serial Number Id Labels On Fru Components; Removing The Solid State Drives For Rma - Juniper QFX10002 Hardware Manual

Airflow - AFO
Fan Tray 1
Airflow - AFO
Fan Tray 2
Airflow - AFO
{master:0}
NOTE: You must remove the fan module to read the fan serial number from the serial number ID
label. The fan module serial number cannot be viewed through the CLI. Fan Tray 2 refers to the
third module from the left, counting from 0.

Locating the Chassis Serial Number ID Label on a QFX10002 Switch

The serial number ID label is located on a label on the top cover.

Locating the Serial Number ID Labels on FRU Components

The power supplies and fan modules installed in a QFX10002 are field-replaceable units (FRUs). For
each FRU, you must remove the FRU from the switch chassis to see the FRU serial number ID label.
• AC power supply—The serial number ID label is on the top of the AC power supply.
• Fan module—The serial number ID label is on the top of the fan module.

Removing the Solid State Drives for RMA

The QFX10002 has two solid-state drives (SSDs) that store the software images, system logs, and the
configuration files. Before returning a chassis to Juniper Networks as part of a Return Merchandise
Authorization (RMA), you have the option of removing the SSDs and disposing them according to your
own company's security procedures. Before you begin this procedure, ensure you have the following
tools:
• ESD grounding strap (not provided)
• Number 2 Phillips screwdriver
Use this optional procedure to remove the drives from the QFX10002 after the device has shutdown
and removed from the rack or cabinet.
1. Attach the ESD grounding strap to your bare wrist and to a site ESD point.
QFX10002 Fan Tray 1, Front to Back
QFX10002 Fan Tray 2, Front to Back
155