X85; Edit Target Filter - Konica Minolta CM-23d Instruction Manual

… Edit Target filter

„
The filter function makes searching for a target easier. The function allows only selected target data to be displayed
by selecting only saved data or by selecting a group created in advance.
Memo
The Edit Target filter is set to "OFF" when the instrument is shipped from the factory.
Operating Procedure
1
Use [▲] or [▼] to move the cursor to "Edit Target
filter", and then press the [Confirmation] key.
The <Edit Target filter> screen is displayed.
2
Use [▲] or [▼] to move the cursor to the desired item.
Settings
{ OFF : All target data will be displayed.
{ only saved data : Displays only numbers for the saved
target.
{ only group : Only targets that satisfy all of the
group conditions displayed below are
displayed. Select and press the
[Confirmation] key to display the
group selection screen. With the
cursor on the group numbers, press
the [Confirmation] key. Using [▲]
or [▼] to select the group number
displays the group name set for the
default group. Press the
[Confirmation] key to confirm, and
press [OK] to return to the <Data
management> screen.
3
Press the [Confirmation] key. (With [OFF] and [only
saved data])
The selection is confirmed and the screen returns to the
<Target> screen.
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed and the screen will
return to the <Data management> screen.
Start the procedure from the <Target menu> - <Data management> screen.
2
64