System Settings
This section explains how to configure calibration, how to display the instrument diagnosis info., and how to
display the instrument info.
Operating Procedure
1
Press [MENU], and then use [◀] or [▶] to display the
<Setting> screen.
Memo
To return to the previous screen, press [MENU] or [ESC].
Calibration setup
Configure the instrument calibration settings.
Operating Procedure
1
Use [▲] or [▼] to move the cursor to "Calibration
setup", and then press the [Confirmation] key.
123
Start the procedure from the measurement screen.
Start the procedure from the <Setting> screen.