Message List - Konica Minolta CM-23d Instruction Manual

Message List

Error message: The operation is not correct. Follow the instructions displayed immediately.
There is no xenon output. Restart and try measuring again.
If the error occurs again, please contact the nearest service center.
There was an error with color measurement device. Restart and try measuring again.
If the error occurs again, please contact the nearest service center.
There is no LED output. Restart and try measuring again.
If the error occurs again, please contact the nearest service center.
There was an error writing to the memory. Restart and try again.
If the error occurs again, please contact the nearest service center.
A memory error has occurred. Please contact the nearest service center.
Connection to the printer failed. Please check the power and the settings.
The USB device is not working. Restart the device.
If the error occurs again, please contact the nearest service center.
The USB host is not working. Restart the device.
If the error occurs again, please contact the nearest service center.
The battery status cannot be obtained. Please contact the nearest service center.
An error has occurred with the clock IC. Please contact the nearest service center.
Warning: Continued use will result in incorrect operation. Follow the instructions displayed as soon as
possible.
The power supply voltage is low. Please charge.
Xenon output has dropped. Replacement is recommended.
The LED output has dropped. Replacement is recommended.
The power supply voltage is insufficient. Please charge.
The battery is low. Replace the battery.
131