Measurement Option Settings - Konica Minolta CM-23d Instruction Manual

„ Measurement Option Settings
To set measurement options, select "Measurement setup" from the <Measurement cond.> menu screen. Select or
specify the following items as the measurement options.
• Specular Component
• Auto average (1 to 10)
• Manual average (1 to 30) : Specify the number of measurements for manual averaging.
• Manual average option : Select the save method when performing manual averaging.
Operating Procedure
1
Press [MENU], and then use [◀] or [▶] to display the
<Measurement cond.> menu screen.
Memo
To return to the previous screen, press [MENU] or [ESC].
2
Use [▲] or [▼] to move the cursor to "Measurement
setup", and then press the [Confirmation] key.
The <Measurement setup> screen is displayed.
3
After setting the measurement conditions, press the
[ESC] to return to the previous screen.
85
: SCI (incl. reflected light) / SCE (excl. reflected light) / Simultaneous SCI+SCE measurement
: Specify the number of measurements for auto averaging.
Start the procedure from the measurement screen.