X85; Change Target Reference - Konica Minolta CM-23d Instruction Manual

… Change Target Reference

„
The target data acting as a reference for the sample can be changed.
Display the sample for which the target reference is to be changed on the <Sample> screen in advance.
Setting Procedure
1
Use [▲] or [▼] to move the cursor to "Change Target
reference", and then press the [Confirmation] key.
The <Change Target reference> screen is displayed.
Notes
• If a target with different measurement conditions is
specified, an error message will be displayed. Change
to a target with the same measurement conditions.
2
The target data number being used will be
displayed. Use [▲] or [▼] to move the cursor to the
color difference target number, and then press the
[Confirmation] key. When the target data is set, the
screen returns to the <Sample> screen.
• If [ESC] is pressed, the target changes will not be
applied and the screen will return to the <Data
management> screen.
Notes
• If a number to which no color difference target data
has been set, the target will be determined as "None"
and the color difference and pass/fail judgment will
not be displayed.
53
Start the procedure from the <Sample menu> - <Data management> screen.