X85; Measurement Mode - Konica Minolta CM-23d Instruction Manual

… Measurement mode

„
Select a measurement mode.
Memo
The measurement mode is set to "Color only" when shipped from the factory.
Operating Procedure
1
Use [▲] or [▼] to move the cursor to "Measurement
mode", and then press the [Confirmation] key.
The <Measurement mode> screen is displayed.
2
Use [▲] or [▼] to move the cursor to the desired
measurement mode.
Selections
{ Color only: Colorimetry
{ Opacity: Opacity value measurement
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
previous screen.
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed and the screen will
return to the previous screen.
Start the procedure from the <Measurement cond.> screen.
3
82