Konica Minolta CM-23d Instruction Manual page 81

5
Repeat step 2 until the necessary characters have
been entered.
• To delete the character to the left of the cursor in the text box,
move the cursor to [×] and press the [Confirmation] key.
6
After inputting the characters, move the cursor to
[OK] and press the [Confirmation] key.
The setting is confirmed and the screen returns to the <Set
group> screen.
Memo
If [ESC] is pressed during configuration, or if the cursor is
moved to "Cancel" and the [Confirmation] key is pressed,
the settings will not be changed and the screen will return to
the <Set group> screen.
7
Move the cursor to [OK] (located below 05, which is
at the very bottom), and press the [Confirmation]
key.
The screen will return to the <Default data setup>
screen.
Be aware that failure to press the [Confirmation] key on
[OK] will cancel all data. Proceed with caution.
2
78