X85; Password Setting - Konica Minolta CM-23d Instruction Manual

… Password Setting

„
The password required for changing the user type from a worker to an administrator can be configured in the
instrument setup.
Operating Procedure
1
Use [▲] or [▼] to move the cursor to "Password
Setting", and then press the [Confirmation] key.
The <Password Setting> screen is displayed.
2
Use [◀]/[▶] or [▲]/[▼] to set the password.
Settings
8 digits (Initial value "00000000": No set password)
3
Press the [Confirmation] key.
The selection is confirmed and the screen returns to the
<Measurement setup> screen.
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed and the screen will
return to the <Measurement setup> screen.
107
Start the procedure from the <Setting> - <Instrument setup> screen.