Color Difference Target Operation; Print Data (Target); Edit Name; Data Management (Target) - Konica Minolta CM-23d Instruction Manual

Color Difference Target Operation

To measure the color difference between two specimens, the color of one of the specimens must be set as the color
difference target. This instrument can store up to 1,000 targets and 5,100 samples.
Memo
• Color difference target data is stored with setting numbers from 0001 to 1000 being assigned. Even if the data at
some point is deleted, these setting numbers do not change. It is useful to group data by assigning numbers of
specific digits.
• To set more accurate color difference target data, use average measurement to measure the target specimen. For
details, refer to the section on average measurement (P.87 and 88).
Notes
• Be sure to perform white calibration before setting color difference targets.
• To ensure measurement accuracy, make sure to keep ambient conditions (temperature, etc.) constant.
The <Target menu> screen allows the following operations for target data.
<Print data>
Print the current target data with the printer.
<Edit name>
Name the target data.
<Data management>
• Delete data
• Set group
• Change list position : Jump to the specified target data.
• Edit Target filter
• Protect data
• Delete all data
Operating Procedure
1
Press [MENU], and then use [◀] or [▶] to display the
<Target menu> screen.
Memo
To return to the previous screen, press [MENU] or [ESC].
: Delete the selected target data.
: Configure the target group.
: Displays the target data that meets the specified conditions.
: Protects all target data. New measurements are still possible.
: Deletes all of the target data.
Start the procedure from the measurement screen.
2
58