X85; Custom - Konica Minolta CM-23d Instruction Manual

… Custom

„
Select the items, including the color space, color difference equation, or index, to be used. Up to 14 items (Custom
01 to Custom 14) to be displayed can be set.
Memo
The custom display items are set to "None" when the instrument is shipped from the factory.
Operating Procedure
1
Use [▲] or [▼] to move the cursor to "Custom xx (01
to 14)", and then press the [Confirmation] key.
The screen for selecting the display items is displayed.
The scroll bar at the right on the screen shows that there
are additional display items that cannot fit on the screen.
2
Use [▲] or [▼] to move the cursor to the desired
display item.
Moving the cursor past the top or bottom of the list will
show additional display items that cannot fit on the screen.
Settings
The following indexes as well as display color values and
color differences for color spaces that can be configured
under color space and color difference equation can be set.
{ WIe (WI E313-73) and ΔWIe : Whiteness index (ASTM E313-73)
{ YId (YI D1925) and ΔYId
{ MI
{ None
{ UE1 to UE3
{ UC1 to UC3
3
Press the [Confirmation] key to confirm, and then press [ESC].
The selection is confirmed and the screen returns to the previous screen.
Notes
If [ESC] is pressed without pressing the [Confirmation] key, the settings will not be changed, and the screen
will return to the <Display cond.> screen.
97
Start the procedure from the <Measurement cond.> - <Display cond.> screen.
: Yellowness index (ASTM D1925)
: Metamerism
: User index
: User class