X85; Pin Code Configuration - Konica Minolta CM-23d Instruction Manual

… PIN Code Configuration

„
Enter the PIN set for the printer/barcode reader (already confirmed).
Operating Procedure
1
Use [▲] or [▼] to move the cursor to "Printer PIN code" or "Scanner PIN code", and then press the
[Confirmation] key.
• The initial personal identification number (PIN) code is "0000".
2
Use [▲], [▼], [◀], or [▶] to enter the PIN code.
• The PIN should consist of between four and eight numbers (0 to 9).
3
After inputting the value, move the cursor to [OK] and press the [Confirmation] key.
The printer/barcode reader will be connectable as an I/O device for the instrument, and the display will return
to the <Communication setup> screen.
Memo
If [ESC] is pressed during configuration, or if the cursor is moved to "Cancel" and the [Confirmation] key is pressed,
the settings will not be changed, and the screen will return to the <Communication setup> screen.
119
Start the procedure from the <Setting> - <Communication setup> screen.