X85; User Type - Konica Minolta CM-23d Instruction Manual

… User type

„
Settings can be protected for each user.
Memo
The user type is set to "Administrator" when the instrument is shipped from the factory.
Operating Procedure
1
Use [▲] or [▼] to move the cursor to "User type",
and then press the [Confirmation] key.
The <User type> setting screen is displayed.
2
Use [▲] or [▼] to move the cursor and select the
user type.
Selections
{ Administrator: All settings can be changed.
{ Worker: Some settings cannot be changed.
Memo
The operations that workers can perform are as follows.
• "Sample" browsing/measurement/printing/deletion
• "Target" browsing/printing
• Calibration
• Instrument info. displaying
• Changing the user type
Memo
It is possible to set a password for changing workers to
administrators. For details, read P.107 "Password Setting".
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
<Instrument setup> screen.
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed, and the screen will
return to the <Instrument setup> screen.
99
Start the procedure from the <Setting> - <Instrument setup> screen.