Konica Minolta CM-23d Instruction Manual page 118

2
Use [▲] or [▼] to move the cursor to "ON", and then
press the [Confirmation] key.
The instrument's Bluetooth function is turned ON and the
display will return to the <Communication setup> screen.
The Bluetooth icon will be displayed in the status bar.
To configure the Bluetooth PIN code, go to step 3 to
continue.
3
Use [▲] or [▼] to move the cursor to "Meter PIN
code", and then press the [Confirmation] key.
The <PIN code setting> screen is displayed.
• The initial personal identification number (PIN) code is
"0000".
4
Use [▲], [▼], [◀], or [▶] to select the value for the
PIN code, and then press the [Confirmation] key to
input each value.
• The PIN should consist of between four and eight
numbers (0 to 9).
5
After inputting the value, move the cursor to [OK]
and press the [Confirmation] key.
The display will return to the <Communication setup>
screen.
115