Table of Contents
Advertisement
Target Color Setting (Target Measurement)
The target becomes the reference color for measuring how different another color with
measurement data is. Before measuring a sample (object to be measured), perform
target measurement to set the target color.
Memo
• Target colors will be shared between each color mode.
• When the buzzer is set to ON, the buzzer will emit a sound when measuring.
The explanations in this section assume that the buzzer sound has been set
to ON.
1
Verify that the <Target Measurement> screen is
displayed.
Memo
If the <Sample Measurement> screen is displayed, or if the
<Target Measurement Results> screen is displayed, press
to display the <Target Measurement> screen.
2
Set the sample surface aperture on the sample to be
used as a reference.
3
Press the measuring button.
Beep
4
Measurement will be performed, and the results will
be displayed on the screen.
These measurement results can be used as the reference for
sample measurement.
Memo
• To perform target measurement again, press
the procedure over from step 1.
TARGET
• If
is pushed by accident and Target is cleared, or if the
power is turned OFF inadvertently, press and hold
display the most recent target data.
Target
L*
TARGET
a*
b*
Target
L*
51.1
a*
12.6
b*
32.1
TARGET
and start
TARGET
to
25
Advertisement
Table of Contents
