Setting A Specimen - Konica Minolta CM-36d Instruction Manual

Setting a Specimen

When measuring the reflectance of a film or plate specimen, install the specimen into the sample holder before
setting it onto the instrument. When measuring a specimen that is not fit into the sample holder, remove the
sample holder and measure with the specimen measuring port in close contact with the specimen.
Notes
The maximum thickness
of a specimen at the
part which is fit into the
sample holder is 30 mm.
Reflectance Measurement
Transmittance Measurement
Transmittance specimen chamber
28
P.29
Specimen
Sample holder
(²)
P.30
Target mask for LAV
measurement and white
calibration plate
Sample holder