Various Settings/Instrument Settings; Mask Setting - Konica Minolta BC-10 Plus Instruction Manual

Various Settings/Instrument Settings

Mask Setting

— Confi gure as necessary —
"Auto Detect" is set under Mask Setting on the instrument when shipped from the factory.
If for some reason automatic detection is not possible, confi gure the settings appropriately
for the target mask attached.
• When "Mask Setting" is not displayed in the menu, refer to page 52 and turn the
setting "ON" in the Instrument Menu Customization settings.
1
Go to the <MENU> screen.
MENU/OK
2
Select "Mask Setting" and confi rm.
MENU/OK
or 
3
Select the type of target mask attached, and
confi rm.
MENU/OK
or 
4
Go back to the <MENU> screen.
MENU/OK
Instrument Menu Customization
Ver.1.10.0000
MENU
Back
Undo
Avg. Reset
Browse Data
Mask Setting
Auto Off
Date/Time
USB Connec.
10:00
MENU
Back
Mask Setting
Auto Detect
MAV
5
Go back to the measurement screen.
MENU/OK
Setting
Initial Setting Setting
The attached target mask will be automatically
● Auto Detect
detected. This is the recommended setting.
When the target mask cannot be detected
MAV automatically, confi gure the settings appropriately for
the target mask attached.
32
10:00
MAV display
05
3.80
BCU
65.6
L*
8.1
a*
25.8
b*
Details