Installation; Removing And Replacing The Digital Operator - YASKAWA VS?616G5 Owner's Manual

2

INSTALLATION

This chapter describes the configuration, location and space when mounting the VS−616G5.
2.1

REMOVING AND REPLACING THE DIGITAL OPERATOR

Remove and replace the digital operator as follows.
12
S Lift the cabinet by the base. When moving the unit, never lift by the front cover.
Otherwise, the main unit may be dropped causing damage to the unit.
S Mount the inverter on nonflammable material (i.e. metal).
Failure to observe this caution can result in a fire.
S When mounting units in an enclosure, install a fan or other cooling device to keep the in-
take air temperature below 45_C.
Overheating may cause a fire or damage to the unit.
(1) Removing the Digital Operator
Front Cover
Digital Operator
Fig. 5 Removing the Digital Operator
CAUTION
Push the digital operator lever in the
2
direction shown by arrow 1 and lift the
digital operator in the direction
shown by arrow 2 to remove the digi-
tal operator from the front cover.
1