Table of Contents
Advertisement
Provisioning system parameters
System timing
....................................................................................................................................................................................................................................
Overview
Before you begin
Procedure
....................................................................................................................................................................................................................................
6 - 2 4
This section provides a procedure for configuring the system timing.
Prior to performing this task, you must be logged into the WaveStar
CIT and the respective network element. Furthermore, you must have
completed the task.
Required privilege code
You must have at least a privilege code of P3 to configure the system
timing.
Required equipment
The following equipment is required to perform this task:
•
WaveStar CIT.
Complete the following steps to configure the system timing:
............................................................................................................................................................
Configuration → Timing/Sync
Select
1
WaveStar CIT.
Result:
The window
............................................................................................................................................................
Select the
System Timing Parameters
2
............................................................................................................................................................
Select the
System Timing
3
............................................................................................................................................................
Select the wait-to-restore time in the group box
4
Click on the respective radio button. The values can be:
•
(initial value)
Zero
•
(
20 SEC
SONET
•
...
1 Minutes
•
(
Infinite
SONET
The wait-to-restore time is the wait which is made before switching
from one timing reference to another.
Lucent Technologies
®
WaveStar
in the
Synchronisation Characteristics
tab.
tab.
mode only)
(selectable via a spin box)
60 Minutes
mode only)
CIT installation and NE provisioning
System View
of the
appears.
Wait To Restore.
365-374-074
Issue a, April 2002
®
Advertisement
Table of Contents
