Table of Contents
Advertisement
DWDM cabling
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
365-374-074
Issue a, April 2002
Important! Only the fiber cables with listed comcode are allowed to
Cables
be used, otherwise the proper functioning of the system can not be
guaranteed.
The
"Single Mode 9/125 fiber-optic cables" (C-2)
passive DWDM on the DMUX/MUX connector plate should connect
with the following connectors:
•
SC connector with a 45° cable entry booth
•
SC connector with a short straight booth.
Lucent Technologies
Passive DWDM (OEM equipment)
that are used for the
D - 9
Advertisement
Table of Contents
