Table of Contents
Advertisement
Power initialisation
Overview
....................................................................................................................................................................................................................................
Purpose
....................................................................................................................................................................................................................................
5 - 2
This section describes all steps which are necessary for the power
initialisation.
Pre-cautions
DANGER
Injury to eyes caused by invisible laser radiation.
LambdaUnite
radiation. Laser radiation can cause considerable injuries to
the eyes.
Never look into the end of an exposed fiber or into an
open optical connector as long as the optical source is
switched on. Always observe the laser warning
instructions (cf.
DANGER
Arcing on removing or inserting a live power supply
plug.
Arcing can cause burns to the hands and damage to the
eyes.
Ensure that the line circuit breaker on the Power
Interface (PI) is in the "OFF" position before removing
or inserting the power supply plug.
Lucent Technologies
Powering, circuit pack installation, and NE software
™
MSS systems operate with invisible laser
"Laser safety"
(1-11)).
download
365-374-074
Issue a, April 2002
Advertisement
Table of Contents
