....................................................................................................................................................................................................................................

Dimensions

Mounting

3 - 3 4

The following figure shows the plate layout (with dimensions) of the

NEBS-2000 rack.

Figure 3-8 Top/Bottom layout of plate

Legend:

*1 or *2

Important! The front side is identified by the Fiber Guides (see item

11 in

Figure 3-7, "Rack layout"

Important! If the rack has to be installed on a raised floor, see the

customer's specifications and use customer-provided materials.

Complete the following steps to mount an NEBS-2000 rack on

the floor:

............................................................................................................................................................

Drill the necessary holes (14 mm [0.55"] in diameter) in the floor *1

or *2.

Lucent Technologies

Hex. Bolt, STL ST-70, M12x20 —

CC847191574

(3-32)).

Mechanical installation

365-374-074

Issue a, April 2002

Table of Contents