Table of Contents
Advertisement
General notes on safety
Basic safety aspects
....................................................................................................................................................................................................................................
General safety
requirements
....................................................................................................................................................................................................................................
1 - 6
In order to keep the technically unavoidable residual risk to a
minimum, it is imperative to observe the following rules:
•
Transport, storage and operation of the system must be under the
permissible conditions only.
See accompanying documentation and information on the system.
•
Installation, configuration and disassembly must be carried out
only by expert personnel and with reference to the respective
documentation.
Due to the complexity of the system, the personnel requires
special training.
•
The system must be operated by expert and authorised users
only.
The user must operate the system only after having read and
understood this chapter on safety and the parts of the
documentation relevant to operation. For complex systems,
additional training is recommended. Any obligatory training for
operating and service personnel must be carried out and
documented.
•
The system must not be operated unless it is in perfect working
order.
Any faults and errors that might affect safety must be reported
immediately by the user to a person in responsibility.
•
The system must be operated only with the connections and
under the environmental conditions as described in the
documentation.
•
Any conversions or changes to the system or parts of the system
(including the software) must be carried out by qualified Lucent
Technologies personnel or by expert personnel authorised by
Lucent Technologies.
All changes carried out by other persons lead to a complete
exemption from liability.
No components/spare parts must be used other than those
recommended by the manufacturer and those listed in the
procurement documents.
•
The removal or disabling of safety facilities, the clearing of faults
and errors, and the maintenance of the equipment must be carried
out by specially qualified personnel only.
Lucent Technologies
Safety
365-374-074
Issue a, April 2002
Advertisement
Table of Contents
