....................................................................................................................................................................................................................................

Overview

Before you begin

Setting of general

parameters

6 - 1 6

This section provides a procedure for configuring the system

parameters (e.g. date and time).

Prior to performing this task, you must be logged into the WaveStar

CIT and the respective NE.

Required privilege code(s)

You must have at least a privilege code of P3, Provisioning, or M3,

Maintenance, to set the system parameters.

Required equipment

The following equipment is required to perform this task:

•

WaveStar CIT.

Complete the following steps to set the system parameters:

............................................................................................................................................................

In the WaveStar CIT

Provision

Result:

The window

Equipment

side of the window.

............................................................................................................................................................

Select the system in the

Result:

The selection window for the system parameters appears on the

right side of the window. This window consists of two tabs,

and

Settings

..........................................................................................................................................................

In the

tab you can set or modify various parameters

Settings

associated with the entire system. Click on the respective check box.

Lucent Technologies

WaveStar

System View

, select

Provision Parameters for Protection Groups or

opens. The

selection tab appears on the left

Equip