....................................................................................................................................................................................................................................

Dimensions

Mounting

365-374-074

Issue a, April 2002

The following figure shows the plate layout (with dimensions) of the

ETSI-2 rack.

Figure 3-2 Top/Bottom plate layout

Legend:

Hex. Bolt, STL ST-70, M12x20 — CC847191574

Adjustable Feet — CC407890623

Important! The front side is identified by the Fiber Guides (see item

11 in

Figure 3-1, "Rack layout"

Important! If the rack has to be installed on a raised floor, see the

customer's specifications and use customer-provided materials.

Complete the following steps to mount an ETSI-2 rack on the

floor:

............................................................................................................................................................

Drill the necessary holes (14 mm [0.55"] in diameter) in the floor

(*1).

Lucent Technologies

Mechanical installation

(3-11)).

3 - 1 3

Table of Contents