Table of Contents
Advertisement
External cable installation
LAN 10/100 Base-T interface
....................................................................................................................................................................................................................................
Locations
Connector data
Type of Connector
Code no. of Connector
CIT Connection(s)
....................................................................................................................................................................................................................................
365-374-074
Issue a, April 2002
The LAN ports are positioned at:
•
LAN1 – CIT Interface
•
CI-CTL:
-
LAN2, LAN3 – Local EMS (HUB) or CIT Interfaces
-
LAN4 – XTreme Interface
Modular Plug / RJ45 8p, shielded
CC407890193 / DC1003604
336 330–1
The LAN1 port at the front on the User Panel is the dedicated port for
the CIT, but the LAN2, 3 and 4 ports can be used at the rear on the
CI-CTL.
Each CIT connection uses these crossed LAN cables:
•
5 m LAN cable
•
10 m LAN cable.
Figure 4-31 CIT Connection (LAN crossed)
Point on Connector
1
Lucent Technologies
System cabling and final assembly
Signal Name
Transmit-data positive
4 - 4 7
Advertisement
Table of Contents
