Table 32 Button Programming Fields - Nortel BCM50 Configuration Manual

110
Section 2: DN records
Assigned lines, Hunt group designators, answer DNs buttons, intercom buttons, and handsfree
buttons cannot be changed through these panels. They appear in read-only format. ISDN terminals
do not have feature buttons that are programmable through this heading.
Table 32 describes the possible settings for telephone buttons.
Table 11 Button programming fields
Setting Values
Model 7100
7208
7310/7316
7316E
7324
2004/2050
2002
2001
7316E
ISDN
Other
Button Number (1-24) <1-XX>
Function Blank
Feature
Internal autodial
External autodial
Value
Feature <feature code>
Internal autodial <Internal DN>
Digits
Feature <feature digits>
External autodial <dialing codes plus dialout
string>
N0027146 [Publish Date]
Description
If you have not yet attached a telephone, choose the model of
the telephone. This will create a number of defaults based on
the telephone capabilities.
This setting reflects whatever you set on the main table.
This field will be read-only if the telephone is already attached
or registered to the system.
• 7310 also refers to the cordless 7406 cordless digital
phones.
• 7316E indicates both a stand-alone7316E digital phones
and a 7316E digital phone connected to one or more KIMs
(Key Indicator Modules).
These telephones have their own set of DN records.
• ISDN refer to any ISDN equipment
This heading is used for the following types of devices:
• analog telephones
• Intl set (European only), is used for other types of
compatible telephones used in specific non-North
American markets, such as the 7000 digital phone.
Choose the type of feature that you want to program on the
telephone buttons.
Blank means that nothing is programmed on the button.
Example: new KIM modules have all blank buttons when they
are first installed.
Choose the type of feature that you want to program on the
telephone buttons.
Blank means that nothing is programmed on the button.
Example: new KIM modules have all blank buttons when they
are first installed.
Use the arrow to choose the feature you want to program on
the button.
Enter the DN number for the internal telephone you want the
telephone to dial by pressing this button.
This includes digits for such features as system speed dial
codes.
Enter the complete dial sequence for the external call. This
sequence will depend on what you chose for the route in the
Value field.
DN records parameters