Figure 17 7316E Digital Phone Display Button Assignment Protocol - Nortel BCM50 Configuration Manual

74
Section 2: DN records
• You cannot assign a line that is configured to private, to another telephone.
• Each line assigned to appear at a telephone must appear at a button with an indicator. The
maximum number of line buttons is 8 for the 7208 digital phones, 10 for the model 7310 and
7316 legacy digital phones, 16 for the 7316E digital phone, and 24 for the model 7324 legacy
digital phone.
However, you need to also consider other button requirements such as intercom buttons and
handsfree buttons. Line programming will not overwrite assigned intercom, Answer DN,
handsfree, or Hunt group buttons.
Intercom buttons, on the other hand, will overwrite anything.
Note: You need at least two intercom buttons if you want to use the
conference feature.
• Answer DNs will also overwrite line programming, but not Intercom buttons. Answer DNs
appear above intercom appearances on the telephone buttons. If an intercom button is added
after answer DNs are assigned, the intercom button pushes the answer DNs up. The top
Answer DN overwrites whatever is above it.
Figure 1 7316E digital phone display button assignment protocol
Lines and hunt
group appearances
assign to first
Line
available button
Line
from top, left
#
HG XX
Line
Line
#
Different models of
telephones may start at
other buttons
N0027146 [Publish Date]
Refer to Figure 17.
(Figure 19)
Answer DNs assign starting above the assigned
intercom buttons (maximum of 8). Answer DNs
overwrite line programming.
Answer DN
Intercom buttons assign starting from the bottom,
Answer DN
right* (maximum of 8). Intercom buttons overwrite
Intercom
line programming, and push up Answer DNs.
Intercom
* Other types of telephones may have a Handsfree key assigned
to the lowest key. In that case, intercom buttons start above that
key.
Configuring telephones: Digital telephones
(Figure 18).