Configuring Telephones: Digital Telephones - Nortel BCM50 Configuration Manual

Configuring telephones: Digital telephones

This section describes the procedures for configuring digital telephones. Digital telephones
support the most comprehensive use of the DN records panels. For detailed panel descriptions,
refer to "DN records parameters" on page
Where:
• Element Manager: Configuration//Telephony//Sets//All DNs
• Set-based admin: **CONFIG//Terminals&Sets
The procedures described in this section are the common DN record configuration procedures.
Tasks: To set up digital telephones wired to system station ports:
Determine the programming for individual telephones and devices attached directly to digital
media bay modules or the fixed digital ports on the main chassis.
"Digital telephone DN record overview" on page 72
"Using the DN panels" on page 73
"System DNs - Line Access tab" on page 73
"Line Assignment and Line Pools" on page 76
"Configuring Capabilities & Preferences" on page 78
"Configuring telephone capabilities" on page 79
"Configuring preferences" on page 82
"Telephone memory button programming" on page 83
"User speed dials" on page 84
"Outgoing call restrictions" on page 85
There are a number of different models of digital telephones. The Norstar legacy telephones are
supported by the BCM50. The current models of digital phones include the 7000, 7100, 7208,
7316, 7316E, 7316E+KIMs digital phones, and the 7406 cordless digital phone.
91.
BCM50 Device Configuration Guide
71
Section 2: DN records