Nortel BCM50 Configuration Manual page 204

204
Section 3: Features
Display prompt
Key: NNN = DNs#; SSS = second DN#; XXX = line number; YYY = second line number
Supervisor
Observe
Their list full
Transfer denied
CANCL RETRY
Transfer to:2___
CANCL RETRY
Unequipped line
Unknown number
Use line pool?
YES NO
Voice call
Your list full
Your number
Observe
N0027146 [Publish Date]
Description of error or action
Silent monitor: The DN you entered belongs to another Supervisor. You
cannot monitor SM supervisor telephones. Press Observe to enter another
hunt group telephone.
Message: You are trying to send a message to a user whose message
waiting list is full.
Transfer: Your transfer does not function for one of these reasons:
– All the resources needed to perform a transfer are in use. Try again later.
– You have tried to transfer an external call to another external party. Some
restrictions apply.
– You cannot transfer your conference call.
Transfer: Press RETRY if you entered the wrong internal number or if the
person to whom you are transferring the call is not available. On 7000 and
7100 digital phones, use the
and then retry.
Line redirection: The line you are trying to redirect cannot be redirected
because the hardware does not support redirection.
Speed dial: The system cannot dial the number stored. Reprogram the
number.
You received a Ring Again offer for a line pool. Press the flashing internal
line button or YES to use the line pool. On 7000 and 7100 digital phones, lift
the handset. Otherwise, press NO or wait 30 seconds for the Ring Again offer
to expire.
Voice call: The line is open for you to speak.
Message: You tried to send a message but your list of sent messages is full.
Cancel one of the messages you sent, if possible, or wait until you have
received a reply to one of those messages.
Silent monitor: You entered your own DN. Press Observe to enter another
hunt group telephone.
Display prompts and messages
FEATURE
#70 feature code to cancel the call,