T24 Key Indicator Module (Kim) Installation Card - Nortel BCM50 Configuration Manual

T24 Key Indicator Module
(KIM) Installation Card
The T24 Key Indicator Module (KIM) is an add-on device which provides 24 extra memory or line buttons
for the T7316E telephone. Up to nine KIMs can be connected to a T7316E telephone.
A Station Auxiliary Power Supply (SAPS) is required for T7316E telephones that have five to nine KIMs
attached. For SAPS installation instructions, refer to the SAPS Installation Card provided with the
SAPS kit.
Single T24 KIM installation
1 Position the metal hooks from the
left side of the KIM next to the
slots on the right side of the
T7316E telephone.
Firmly press the T7316E and KIM
together.
2 Slide the KIM down until it is
aligned with the T7316E
telephone.
3 Remove the stand
from the T7316E
telephone.
4 Connect the KIM cord to
the accessory connector
port on the T7316E
telephone.
5 Replace the stand on the T7316E telephone to complete the
installation.
Multiple T24 KIM installation
1 Position the T7316E
telephone and KIMs
together. Align the hooks
on each KIM to the slots
on the next KIM.
Firmly press the T7316E
and KIMs together.
2 Slide the KIMs down until
they are aligned with the
T7316E telephone.
3 Remove the stands
Press here
from
to remove stand.
KIMs and
the T7316E
telephone.
4 Connect each KIM cord to
the connector port on the
next KIM in a daisy-chain
order.
5 Connect the cord on
the first KIM
to the accessory
connector port on the
T7316E
telephone.
6 Replace the stands on the KIMs and the T7316E
telephone to complete the installation.
Press here
to remove
stands.
KIM 3 KIM 1
KIM 2
Cord to
T7316E
KIM 1