Figure 11 Ring Group Lines; Table 12 Ringing Group Schedule Line Values - Nortel BCM50 Configuration Manual

46
Section 1: System telephony
Figure 2 Ring group lines
Table 12 describes the headings on both these panels.
Table 1 Ringing group schedule line values
Attribute Value
Lines panel:
Line XXX
Line Settings panel:
Schedules <read-only>
Ring group Ring group <XXX>
Aux ringer <checkbox>no
longer checkbox,
true false
N0027146 [Publish Date]
Description
This list includes all analog and digital lines plus the target lines (PRI and
VoIP lines). Program only the ones that are active on the system.
You only need to configure the schedules that you use for your system.
Type in a ring group number (001-100).
Only one ring group can be assigned to a line for each schedule. To combine
groups of ringing sets, you must create a new ring group which contains all
the sets you want to ring and assign it to the line.
This variable indicates whether the auxiliary ringer (if installed) also rings
when Ringing service is on.
TIPS:
• The default ringing telephone is 221 (Start DN). This means that all lines
ring at telephone 221 when Ringing service is on.
• If you have an auxiliary ringer programmed to ring for calls on an external
line and you transfer a call on that line without announcing the transfer, the
auxiliary ringer will ring for the call transfer.
Creating ring groups