Making Announcements To Individuals (Voice Call) - Nortel BCM50 Configuration Manual

214
Section 3: Features
Business Series Terminals note: If the active call is on mute when the page comes in, it will not
be returned to mute when the call comes off hold.
Making a page announcement
Internal page: Make a page announcement to all, or to a specific group of telephones, through the
telephone speakers. Zone 0 pages all zones.
Enter FEATURE 61.
1
Press 0 to 6 to page a specific zone.
2
External page: Make a page announcement through an external loudspeaker system.
Enter FEATURE 62.
1
Internal and external page: Make a page announcement through both your telephone speakers
and an external loudspeaker system. Zone 0 pages all zones.
Enter FEATURE 63.
1
Press 0 to 6 to page a specific zone.
2

Making announcements to individuals (Voice Call)

Use the Voice Call feature if you want to make an announcement through a specific telephone
speaker.
Voice Call is a standard system feature and does not require any programming to activate or
deactivate the feature.
Feature constraints:
• Enable HF answerback if you want to respond to a voice call without picking up the handset.
• Telephones that do not have handsfree capability receive voice calls as ringing calls (7000 and
7100 digital phones, 2001 IP phones, and analog telephones).
Making a voice announcement
Make a voice announcement or begin a conversation through the speaker of another telephone
without first making the other telephone ring.
Enter FEATURE 66.
1
Speak through your handset, use handsfree or a headset.
2
N0027146 [Publish Date]
Feature configuration: Making calls