Nortel BCM50 Configuration Manual page 121

Registering Nortel 20XX IP telephones
Table 1 IP telephone server configurations (Continued)
Field Value
VLAN 0: No VLAN
1: Manual VLAN
2: Automatically
discover VLAN
using DHCP
Cfg XAS? 0: No (default)
1: Yes
* Firewall note: Ensure that the firewall filters are set up to allow IP traffic into and out of the system.
After you have entered all the configuration information, the telephone attempts to connect to the
system. The message
the message changes to
several minutes. Do not disturb the telephone during this time.
When the telephone connects to the server and is ready to use, the display shows the time and date.
As well, the six keys at the top of the display are labelled.
If you experience problems with IP telephone registration, refer to the section:
IP telephones".
Notes:
• If the DN record has not yet been configured, as will be the case with auto-assigned DNs, you
will only be able to make local calls, until other lines have been assigned in the DN record.
Refer to ....................................................
• If the telephone has not been registered before, you will receive a
information, as prompted. Refer to
Description
Choose 0: NO VLAN if there is no VLAN on the network.
If you do not have DHCP on the network, or if DHCP is supplied by a
remote server, select number 1 and enter the VLAN ID*.
If you have the system DHCP active on your system, select number 2 if
you want DHCP to automatically find the VLAN assignment.
*VLAN is a network routing feature provided by specific types of
switches. To find out if VLAN has been deployed on your system, check
with your network administrator. If VLAN is deployed, the system
administrator responsible for the switch can provide the VLAN ID(s) for
your system.
If you want the telephone to be able to connect to a Net6 service
provider server, choose 1. You will then be prompted for an IP address
for the server.
appears on the display. If the connection is successful,
Locating Server
Connecting to Server
"Registering the telephone to the system" on page
Section 2: DN records
after about 15 seconds. Initialization may take
New Set
BCM50 Device Configuration Guide
121
"Troubleshooting
message. Enter the
118.