Nortel BCM50 Configuration Manual page 198

198
Section 3: Features
Display prompt
Key: NNN = DNs#; SSS = second DN#; XXX = line number; YYY = second line number
LXXX:LINENAMVMsg
NEXT CALL CLEAR
LineXXX>LineYYY
LineXXX to prime
LineXXX transfer
LineXXX waiting
Line denied
Line in use
Line Redirection
QUIT ADD REMOVE
Messages & Calls
MSG CALLS
Make calls first
Message denied
Message list
SHOW ADD EXIT
Message to:
Microphone muted
Move line from:
QUIT
Move line to:
QUIT
Need Handsfree
N0027146 [Publish Date]
Description of error or action
Message: You are viewing your message list. The display shows the
number and name of the line used for your message.
Prime telephone: The call coming in on line XXX for target line YYY has
come to you because Line YYY is busy.
Prime telephone: There is no telephone that can receive a call on line XXX
so the system has transferred it to you.
Another user in the system is transferring a call to you on line XXX.
A camped call is waiting. Press the line button or use Call Queuing to
HOLD
answer the call. Press
You selected a line that is private to another telephone.
Trunk Answer: You have tried to pick up a call on a private line.
The line is in use. Make the call using normal methods or wait until a line is
free.
Line redirection: Press * or ADD to begin redirection. Press # or REMOVE to
cancel a previous redirection.
Message: You have one or more messages and one or more new Call Logs.
FEATURE
Press 806 to change the first line of the display to the current
time and date.
The feature you tried to use requires you to be on an active call at your
telephone. This prompt also appears when information about a call is
cleared by a system reset.
Message: You tried to send a message to an invalid internal number or to a
telephone that is out of service.
Message: SHOW appears when you have remaining messages. Press SHOW
to review messages you have sent. Press ADD to send a new message.
Message: Enter the internal number of the telephone to which you want to
send a message.
Voice call: Your handsfree microphone is on the mute setting. Press the
button labeled Handsfree/Mute or pick up your handset to respond to the
voice call.
Move button: Press the button of the line you want to move. Press
FEATURE
or QUIT when you have finished moving lines.
Move button: Press the button you want to move the line to. Neither of the
buttons is erased. The lines, or the line and feature, switch places.
Silent monitor: You entered the silent monitor feature code without picking
up the handset, and the telephone does not support Handsfree operation.
Display prompts and messages
if you have 7000 and 7100 digital phones.