Nortel BCM50 Configuration Manual page 194

194
Section 3: Features
Display prompt
Key: NNN = DNs#; SSS = second DN#; XXX = line number; YYY = second line number
Already parked
Autodial full
Button erased
Call NNN?
YES NO
Calling NNN
PRIORITY LATER
Call blocked
Camped: NNN
CALLBCK
Camp denied
Camp to:
CANCL
Cancel denied
Can't ring again
Cleared>LINENAM
NEXT
CLI COPY INCOMP
Conference busy
Conf Resrce Full
Denied in admin
N0027146 [Publish Date]
Description of error or action
Call park: The person you were talking to has parked your call. You cannot
park the same call.
Auto dial: The memory allocated to auto dial numbers in your system is full.
Auto dial: While programming external auto dial, you erased the button by
pressing HOLD or OK before entering any digits.
You have received a Ring Again offer from a call to an internal telephone.
Press the flashing internal line button or YES to call the number again. On
7000 and 7100 digital phones, just lift the handset. Otherwise, press NO or
wait 30 seconds for Ring Again to expire.
Wait for the telephone to be answered. If no one answers, press LATER to
use the Ring Again feature or Message feature, or press PRIORITY to make
a priority call.
Priority Call: You initiated the Priority call transfer to this local.
Priority call: You tried to place a priority call to another telephone in your
system. The person you called has blocked your call.
The person at extension NNN has not answered the camped call. The call
has come back to you. Press the line button or CALLBCK to reconnect to the
call. On 7000 and 7100 digital phones, just pick up the handset to reconnect
to the call.
Camp-on: You have tried to camp an internal call. You can camp external
calls only.
Camp-on: Dial the number of the internal telephone to which you want to
camp the call.
Message: You entered an invalid number when trying to cancel a message.
You cannot use Ring Again on your current call. You can use Ring Again
while you have a busy signal on an internal call or line pool request or while
an internal call is ringing.
Message: You cleared an external message from your message waiting list.
The message exists in your message center until you erase it there.
You attempted to allow CLI for an assigned line for more than 30
telephones.
Conference: You tried to make a conference call, but your system is
handling the maximum number of conference calls (6).
Silent Monitor: The six conference resources on the system are already
occupied. This is a transient display that reverts to HG Member DN: busy.
You are trying to use a feature, but do not have access to it under
administration.
Last Number redial: The Last Number is not allowed.
Display prompts and messages