Nortel BCM50 Configuration Manual page 221

Feature configuration: Making calls
Enter the feature code, auto dial, speed dial feature code and number, or SWCA code that you
2
want to program on your telephone.
Note: Using this feature overrides programming entered by the system
administrator. You cannot change buttons which have handsfree, lines,
intercom lines or Answer DNs assigned to them.
Erase a feature from a memory button
Press FEATURE *1
1
Press the memory key you want to erase.
2
Press OK.
3
Note: You cannot erase buttons assigned with lines, Answer DNs, or
intercom keys.
Store more than one number or code on one button
Press FEATURE *9 to insert a break point between numbers or codes.
1
You can program up to four numbers or codes separated by break points per memory key.
To use: The first press of the button dials the first number or code. Pressing the button a
2
second time dials the next number or code.
Adding external call codes to a memory button dial sequence
Enter FEATURE *3
1
Enter autodial or speed dial feature code.
2
Enter call feature in appropriate place in dialing string.
3
External call codes
Call code features can be part of dial strings for calls to external numbers. These codes allow
various actions to occur as part of the dialing sequence.
Note that you can use special alphabetical designators for the following features when you are
entering these features as part of a dial string within the Element Manager for:
• hotline external number
• call forward to external numbers
• system and user speed dial numbers
Section 3: Features
BCM50 Device Configuration Guide
221